Tag Archives: Charlie Horse

MTA Launch Event, 2021-04-10

Posted on by

by Keith Yoerg (RRS Secretary)

The RRS held a launch event at our Mojave Test Area (MTA) on April 10, 2021, the day after our monthly meeting. COVID-19 still remains a threat so everyone continued to observe protective protocols – masks & physical distancing. For the first time in months, we had a day with great weather for launching rockets and we made the most of it! We had low-power, high-power, and experimental solid rocket launches, another launch of Bill Inman’s Solar Cat, the maiden voyage of Wolfram Blume’s Gas Guzzler, and a static fire of Larry Hoffing’s solid power motors. Osvaldo Tarditti was our pyrotechnic operator in charge.

Activity around 9:30 am at the MTA – prep work ongoing for CTRL+V (left) and Solar Cat (right)

CTRL+V (USC RPL)

Preparation for the first launch of the day: CTRL+V actually began the day before launch with motor integration and other preparation work taking place at the MTA site. On the morning of the launch, the team from the USCRPL installed the rocket on the launch rail, which was then raised into place south of the MTA’s vertical test stand. Wires running from the rail were staked to poles and hammered into the ground to provide additional stability for the rail. Several launch crew members can be seen prepping the rocket above, and a still image of the launch of the rocket can be seen below.

Launch of USC RPL’s CTRL+V, the smoke took a strange path up the rail faster than the rocket!

The rocket flew on a 6″ experimental rocket motor. A specific procedure was followed prior to launch, under the supervision of the pyro op, which included radio go/no-go call outs from several teams including tracking, avionics, and even a drone that took footage of the launch! All spectators and crew were in the bunker during takeoff at 11:04 am – ignition was prompt and rocket left the rail quickly and cleanly. The initial telemetry reported by the team indicated an altitude of over 11 km. Several members then went off on the daunting task of recovering the rocket from wherever it landed.

LUMINEER (BPS.space)

The next flight of the day came from BPS.space with the rocket Lumineer. This launch was conducted from one of the pads just west of the vertical test stand. The flight took place around 1:20 pm on a commercial Cessaroni “N” motor and was livestreamed to a reported 9,000 viewers on YouTube. The rocket utilized a “fly-away” rail guide to provide stability and eliminate the drag of rail buttons, which can be seen still in the process of falling from the rocket in the image below. The target altitude was 10 km, but telemetry was lost shortly after takeoff so the actual peak altitude was unclear after launch, and the rocket was not recovered for some time.

Launch of Lumineer from BPS.space

GAS GUZZLER (Wolfram Blume)

Wolfram Blume has been diligently making the pilgrimage to the MTA events over the last several months and the weather has been uncooperative for his chances of launching, but that finally changed in April! The maiden voyage of the Gas Guzzler took place from the pad just west of the vertical test stand. This flight was conducted to answer several questions about staging during the flight – so the ram jet second stage was flown empty and only the first stage, commercial solid rocket motor was used to power the rocket. A slow-motion (10% full speed) video of the launch can be seen here.

Launch of Wolfram Blume’s Gas Guzzler, it’s so calm the flag on the vertical test stand isn’t waving!

The ascent of the rocket was smooth, validating the rigidity of the rocket’s design and the stability when empty. The data from onboard altimeters confirmed that the ram air entering the 2nd stage was enough to separate the 2 stages immediately (0.1 second) after motor burnout which occurred at 1,440 ft. The parachute for the booster stage deployed successfully and that stage was recovered without damage. The ram jet, upper stage utilizes a dual-deployment of a drogue parachute at apogee and main parachute at 1,000 ft above the ground. While each of these deployments were successful, the main parachute did not pull out of the deployment bag so the stage landed hard and damaged a few parts. Fortunately, the 2nd stage is not the final parts intended for the full flight of both stages so there will not be delays to the project to rebuild. Wolfram collected lots of useful data and plans to add a GPS tracker and other upgrades before his next flight. We all hope the weather remains in his (and all of our) favor!

CHARLIE HORSE (Keith Yoerg)

Up next was the 12th flight of Keith Yoerg’s rocket Charlie Horse. This was the first flight test of the LoRa GPS tracking boards discussed in previous reports. There are several difficulties with getting the units setup properly, not least of which being the frequent firmware updates required to pair the board with the mobile phone app (2 updates in as many months). Powering up the boards the night before would have helped eliminate these struggles, but a successful launch was still completed, a slow-motion (10% full-speed) video of the launch can be seen here, which was on a commercial Cessaroni I280-Smokey Sam motor.

Keith Yoerg’s Charlie Horse seen through the smoke of launch – the camera was tipping over!

One issue still to be resolved with the LoRa trackers is a setting within the Meshtastic mobile application which trades off tracking range for the speed at which new information packets are sent. The “medium” setting was used on this flight but for rocket flights it may be advantageous to reduce the range (which is purported to be up to 10 miles) in favor of more frequent location updates. More testing will be done on future flights in hopes of developing a cheap, simple GPS tracking available for rockets flying at the RRS.

SOLAR CAT (Bill Inman)

Bill Inman’s solar-heated steam-powered Solar Cat rocket took to the skies around 4:31 pm. While the weather was perfect for most of the projects, the light overcast that can be seen in the pictures above proved problematic for the solar heating required for the best flight. In addition by launch time, the solar collector was at its westernmost limit so no more heating was possible. At launch the water temp was 370 F and was at 130 psi.

Bill Inman’s Solar Cat takes to the skies for it’s 2nd launch at the MTA

The flight reached 41 mph speed and achieved a 60 ft altitude. While this was an improvement on the first Solar Cat launch at the MTA, with additional heating there could be even more impressive stats. While he can’t control the clouds, Bill hopes to arrive at the MTA site the night before a launch in the future to increase the chances  of getting off a good test and launch before reaching our western limit of travel for the solar collector.

THE YOERG CHALLENGE (Dimitri Timohovich & Keith Yoerg)

With this being Dimitri’s last MTA event before leaving to Alaska for the summer, some other RRS members need to step up to the plate to keep the “Yoerg Challenge” alive. I have put out the call for more RRS members to build low-power rockets to fly at the MTA, and have left my 5-pad PVC launcher at the site for future launches. IT’S CHEAP, IT’S FUN, IT’S A CHALLENGE (and everyone is a winner)! What’s not to love? So get out there and build some model rockets!

The remains of the “Space Crater” – not covered in raw egg!

The entrants this month included Keith’s Big Bertha, Baby Bertha, and Hi-Flyer XL rockets and Dimitri’s Space Crater – which carried eggs in honor of Easter this month. Fortunately, Dimitri’s wife had the foresight to hard-boil the eggs because his rocket took the “Crater” part of its name a bit too seriously (the remains are shown above). A few of Keith’s flights before the GoPro battery died can be seen here.

SOLID MOTOR TEST FIRE (Larry Hoffing)

Larry Hoffing had some experimental solid rocket motors ready to test fire, but with all the other activity going on at the site he took the time to install a new “No Smoking” sign on the covered propellant loading area (shown below). Once things were a little less active, Larry was able to affix the motors and perform a test-fire. While the burns were long, they did not produce much thrust and need to be improved upon before use in a rocket.

No smoking sign added to the covered propellant loading area by Larry

CONCLUSION

In addition to everything detailed above, one of the USC RPL members flew a high power rocket to earn her Level 1 certification with the National Association of Rocketry, and Dimitri flew his water rockets with his son.

This was by far the most active event at the MTA in the past year and was an exciting day for anyone who likes to see rockets fly! Our next launch date has not been decided upon, but we hope to have an event in May to continue hosting at least one event per month at the site.

April 2021 Virtual Meeting

Posted on by

by Keith Yoerg (RRS Secretary)

The latest meeting of the Reaction Research Society took place this past Friday, April 9th and had 15 attendees – including another guest presenter. We kicked off the meeting by watching footage of Bill Inman’s Solar Cat launch from March, and a video of a liquid engine static fire from the Georgia Tech Yellow Jacket Space Program, who presented to the RRS about their project last month.

Screenshot of discussion during the monthly meeting

GUEST PRESENTATION – WILSON F/X LAUNCH CONTROLLERS

Brad Wilson from Wilson F/X launch controllers was our guest presenter for this month, continuing our recent discussions on wireless launch controllers. Brad started the company roughly 20 years ago with Dan Fox, after building launch controllers for their local high power rocketry club in the midwest. They began with a wired single pad controller, and have since expanded to build 64-pad systems as well as adding wireless firing capabilities. Their wired and wireless modules are in use by many local rocketry clubs including ROC and FAR, as well as others around the country. The largest motor known to have been flown on a Wilson F/X system was a size Q at a rocket launch in Black Rock.

Richard Dierking modeling the wireless launch module from Wilson F/X

RRS members had a lot of good questions for Brad, who was gracious enough to explain several different features and specifications of his system. Both the wired and wireless Wilson F/X systems use 32-bit encryption to send the firing signal from the control box (where the operator flips the switch) to the pad box (which supplies the current to light the ignition charge). This means the control box is required and the pad box cannot be used by itself to fire the motor. Brad sent along some product specification sheets for RRS members to review. Any member that would like a copy can request one by emailing the RRS secretary at: secretary@rrs.org

EVENTS AT THE MTA

After a brief discussion about the March launch event, the group began planning for the MTA event the day after the meeting. Several members with projects that have become staples at our recent events planned to join for the launch – including Bill Inman’s Solar Cat, Wolfram Blume’s Gas Guzzler, and “Yoerg Challenge” low-power model rockets from Dimitri Timohovich and Keith Yoerg. In addition, Larry Hoffing expects to have experimental motors ready for testing.

A low-power rocket launch near the MTA entrance

2 additional fights are expected – a rocket from the USC Rocket Propulsion Lab flying on an experimental 6″ diameter motor and BPS.space, flying on a commercial N sized motor. A write-up on these activities will be available within the next few days.

LAUNCH COORDINATION BETWEEN RRS & FAR

Rick Maschek joined for the meeting and began a discussion about coordination of launching activities between the RRS and our neighbors at FAR. With activity picking up at both organizations, it’s becoming more common for us to have event scheduled at both sites for the same weekend. Because of the proximity of our launch sites, rockets have been known to launch from one and land near the other.

Both groups are committed to safety when performing rocket activities, and improving communication about launches between on-site personnel in each organization has been identified as a priority. One option suggested is to alternate weekends between the organizations so that events do not overlap. Since weather and other schedule considerations can sometimes make that difficult to implement, it was agreed that radio communication should be established on days when both organizations are operating so that everyone will be aware of impending launches.

YOUTH OUTREACH CLASS

Frank Miuccio updated the membership on the status of the youth outreach programs that the RRS hosts, which seem likely to happen but are more complicated due to COVID-19 precautions. A classroom space large enough for adequate physical distancing has been found, but travel to the MTA site will likely not be possible until more restrictions are lifted.

Because the demonstration of rocket flights is one of the more engaging aspects of the class, Frank has begun developing a class plan that would allow for more hands-on activities without pyrotechnics. Soda straw rockets propelled by air and film canisters propelled by a baking soda & vinegar mixture are 2 ideas being pursued to give the students an exciting achievement until an MTA visit can be safely arranged.

NEXT MONTHLY MEETING

The next RRS monthly meeting will be held virtually on Friday, May 14th at 7:30 pm pacific time. Current members will receive an invite via e-mail the week of the meeting. Non-members (or members who have not received recent invites) can request an invitation by sending an email to:

secretary@rrs.org

MTA launch event, 2020-11-07

Posted on by

By Dave Nordling, Reaction Research Society

The RRS held a launch event at the Mojave Test Area on November 7, 2020. It was a largely overcast day with brief periods of sun. The daytime temperatures reached only 50 Fahrenheit but the winds were no more than 20 miles per hour which meets the criteria for safe launch. Osvaldo Tarditti, our society president, was the pyrotechnic operator in charge for this event.

RECOVERY OF ANOTHER ALPHA FROM JULY

John Krell was able to find the standard length micrograin alpha rocket laumched at the July 2020 event. The rocket was found further north than expected but the downrange distance was about right. This was the rocket with the ceramic coated nozzle which was to have its performance compared to the standard alpha with a plain steel nozzle which is known to erode from the high temperature exhaust.

Recovered standard alpha from the July 2020 launch
The standard length alpha was recovered with its nozzle and the ceramic lined throat. No erosion seems to be present.

Unfortunately, the data was absent on the memory chip. It appears there was a malfunction and flight data wasn’t recorded. John is looking into the problem.

The nozzle was removed and inspected from the recovered alpha. Preliminary results show that the nozzle stayed intact. Careful removal of the largely zinc metallic residue firmly adhered to the entrance and nozzle throat must be done to determine how well the ceramic coating survived the 2300 Fahrenheit flame temperature for the quick four-tenths of a second burn time, John Krell is trying a traditional remedy of heated white vinegar (acetic acid) which has been modestly successful in this application.

The golden color of the coating can be seen at the inlet. The condition of the coating around the throat is what must be determined.

A FEW ROCKETS IN NOVEMBER

Keith Yoerg and a few others launched five model rockets from the MTA event that day. We’re getting a lot more participants at our launch events which is a trend the society will encourage as we are expanding our organization by supporting a range of projects.

  1. The first was “Star Orbiter” which was prepared and launched by Wilbur Owens, and successfully recovered about 3/4 of a mile from the launch site. 
  2. The second launch of the “29mm Rocket” was prepared and launched by Ivan DeDios, and unfortunately was not found after a lengthy search. 
  3. The third launch of the day was “Charlie Horse” and featured the largest motor flown that day. The rocket was prepared and launched by Keith Yoerg and resulted in his first flight above Mach 1.0. In addition, it was the first flight of a GPS carabiner used to track the rocket which performed extremely well & was easy to use. Cheaper options of similar technology are being researched for future flights.
  4. The fourth launch was the “Bell X-2” which was prepared and launched by Keith Yoerg, and was a textbook flight with a simple recovery.
  5. The fifth and final launch of the day was “Low and Slow” which was prepared and launched by Alexander Jones. Unfortunately, the parachute failed to deploy at apogee and the rocket came back ballistically & was destroyed along with one of the carabiner GPS units.
The aptly named “29mm rocket” by Keith Yoerg, powered by a 29mm H115 Darkmatter motor, seen at take-off from the RRS MTA on 11-07-2020
The 29mm Rocket taking off.
Keith Yoerg’s “Charlie Horse” takes flight again frim the RRS MTA on 11-07-2020 powered by a 38mm J520 Skidmark motor.
A great still capture on the Bell X-2 at launch.
Camera view of the Low and Slow rocket at take-off
The recovered remains of the “Low and Slow” rocket by Alexander Jones.

The RRS encourages all forms of reaction-based propulsion including commercial solid motor rocket flights. We have our traditional love for the micrograin rockets, but our society is open to all ideas as long as they contact the society and our pyro-op in charge well in advance of our launch events.

The five commercial solid motors laid out on display.

BILL INMAN’S SOLAR COLLECTOR

Bill Inman came out to the MTA to test his next prototype of a solar collector. Bill’s latest project is exploring the idea of a solar-based heating system for a steam rocket. This second device had a wider collection area and a longer pipe length. He didn’t have good sun conditions that day and his larger collector structure was a little unstable in the wind, but he was able to get ideas for improvement.

Dimitri Timohovich aids Bill Inman in deploying his second generation prototype solar heater. It was a less than ideal day for solar insolation at the RRS MTA. Even the Mojave Desert can be cold on winter days.
A wider collector area in the new design. It was a less than sunny day.

There was a very short period of sun that day and in that time a measurable temperature gain was seen with the new collector.

A wider view of Bill’s solar collector

Testing the same device in the days following the MTA event at another location showed this second design to be a substantial improvement with the larger parabolic mirror area which allowed the water pipe to reach fluid temperatures exceeding 300 Fahrenheit and internal pressures of 90 psig. This is closer to Bill’s goal of reaching above 400 Fahrenheit for his next generation steam rocket from his successful Scalded Cat design almost 20 years ago.

Vapor curve data for water, psia in the left column, degrees Fahrenheit on the right.
The vspor curve of water showing the whole range from triple-point to critical point.

STATIC FIRE OF THE USC RPL ALUMNI SOLID MOTOR

A group of USC RPL alumni static fired an 8-inch solid motor at the MTA. The team worked very hard from the night before and all through the day in getting the motor ready for static fire. The RRS MTA is an excellent location for these operations and conducting safe motor testing.

Unfortunately with some experiments, the results can be disappointing. The hot-fire in the very last hours of daylight ended with a rupture near the bulkhead after roughly one second of the burn.

The 8-inch motor in preparation for testing.
Preparation at the pad as the afternoon is fading at the MTA
Photo of the static firing, less than ideal performance

IN CLOSING

The details of the event will likely be discussed at the monthly meeting teleconference on November 13th. We’ll be also discussing our next launch event to be held next month in December.

We will likely attempt the nitrous oxide hybrid motor with the modified igniter. The colder temperatures should allow the propellant manifold to operate properly without any modifications.

The removal and replacement of the bent panel on the vertical thrust stand was deferred because of USC’s static firing of their solid motor. This maintenance activity will remain a high priority since the replacement plates are ready and at the MTA already.

Thanks to the many members that contributed to this report. We will be planning our next launch event for the month of December at the monthly meeting scheduled for Friday, November 13th.